Welding head for argon-arc welding “ASGV-4ARK” is made for automatic arc welding with non-consumable electrode of products made of structural steels, stainless steels, heat resistant steels and alloys, as well as the welding of titanium and aluminum alloys by continuously burning and pulsed arc of DC and AC current with a transverse oscillations of the electrode relative to the joint.

Machine for tungsten electrode arc welding “ADSV-6M” is made for argon-arc welding of longitudinal seams with consumable electrode of the products of corrosion resistant steels and titanium alloys by method of constantly burning or pulsed DC arc.

Radial cantilever machine for argon-arc welding “ARC-4A” is made for argon-arc welding of circumferential and longitudinal welds of stainless, titanium and heat-resistant superalloys in the horizontal plane by the tungsten electrode in argon.

Radial cantilever machine for argon-arc welding “ARC-4M” is made for argon-arc welding of longitudinal seams of anticorrosive, titanium and heat-resistance alloys in the horizontal plane with tungsten non-consumable electrode in argon. The welding process is conducted in two modes: continuous and pulse.

Plant for argon-arc welding of circumferential seams “USK-22MK” is made for automatic argon arc welding of circumferential joints of tubes, pipes, stocks, struts made of anticorrosive heat-resistant structural steels and alloys in inert gas medium with the filler wire or without it with non-consumable electrode.

Plant for automatic argon-arc welding “USK-2500R” is made for welding of circumferential seams.
 

Plant for welding in a controlled operating medium “USKS-21” is made for manual arc welding of parts and assembly units made of titanium alloys and other reactive metals in a controlled medium. 

Plant for welding in a controlled operating medium “USKS-25” is designed for arc welding of reactive metals and alloys in an inert medium (argon with a content of impurities of oxygen not more 0.003%, nitrogen – not more than 0.01%, hydrogen - not more than 0,006%, water vapor - not more than 0,004%).

Plant for welding in a controlled operating medium “USKS-26” is designed for automatic arc welding by nonconsumable (tungsten) electrode of parts made of reactive metals and alloys, placed on the chuck plate of the rotator in a controlled medium.

Plant for welding in a controlled operating medium “USKS-27” is designed for automatic and manual arc welding with non-consumable electrode in a controlled medium of circumferential and longitudinal seams of parts made of reactive metals and alloys, mounted on the chuck plate of the rotator, with the filler wire or without it.

Machine for resistance, roller, condenser welding “MRK-5M” is designed for the contact roller condenser welding of sheet metal parts and components from non-ferrous alloys and corrosion-resistant steels.

Plant for longitudinal joints welding “USPO-1,2” is designed for automatic gas-shielded welding with non-consumable electrode  of longitudinal joints of sheets and shells of parts made of constructional, anti-corrosion, heat-resistant steels and alloys.

Plant for longitudinal joints welding “USPO-1,8” is made for automatic gas-shielded welding of longitudinal joints of sheets and shells of parts made of construction, anti-corrosion, heat-resistant steels and alloys with non-consumable electrode.

Plant for welding valves to the pipelines “UST-9M” is made for gas-shielded  (argon, helium) welding of valves and other reinforcement (diameter 20-200 mm) made of aluminum, titanium, steel to the pipes in fixed position by non-consumable electrode with filler wire in vertical and horizontal locations of the plane of the welded joint and the angular variations of inclination of the welding head with the programming by welding current depending on the spatial position of the burner.

Complex plant for welding by immersed electrode “SKPD-2500” is made for welding of longitudinal and circumferential seams of parts made of structural, heat-resistant, corrosion-resistant steels, titanium and aluminum alloys, by immersed non-consumable electrode.
 

Head for welding by immersed electrode “GSPD-1M” is made for welding of circular, circumferential and longitudinal seams of workpieces and products made of anticorrosive, aluminum, magnesium and titanium alloys, by non-consumable electrode arc DC in inert gases medium.

Hand torch for argon-arc welding “RGA-150”, “RGA-400” are made for consumable electrode welding of parts made of anticorrosive and heat-resistant structural steels, aluminum and magnesium alloys.
 

Welding oscillators “OSPPZ” type are intended for initial excitation of the electric arc of direct  (“OSPPZ-300M-1”), and alternating (“OSPPZ-300-2”) currents in automatic, semi-automatic and manual gas-shielded (argon) welding and in plasmatrones of different designation with electrode gap of not more than 5 mm.

Open induction melting furnace “PPI-0,45” is made for melting steel, cast iron, non-ferrous alloys in the tamped crucible with subsequent filling of the molds or flasks. This furnace provides shaped castings.

Plant “VIPE-3M” is designed for making equiaxed castings of heat-resistant alloys and steels in terms of mass production.

Plant “VIP-NK PM” is made for casting blades of special heat-resistant alloys, crystallizing at lower speeds at high thermal gradients, and for high-speed directional crystallization of the blades made of conventional heat-resistant alloys and for other parts castings.

Vacuum melting plant “UPPF-U” is made for casting items with polycrystalline structure of heat-resistance superalloys in terms of mass production and for mastering complex technologies in pilot production.

Plant “UPPF-U4” is made to produce shaped castings made of heat-resistant steels and alloys in vacuum.

Vacuum melting and casting plant with molds heating furnace “UPF-300” is made to produce castings with equiaxed structure (blades) height to 300 mm.

Vacuum arc melting plant “833 DM” is made to melt the consumable electrode and the subsequent casting of titanium in molds up to 120 kg. During the melting electrode has a negative electric charge, the skull crucible is positive. Furnace is made for stationary casting using different molds.

Vacuum arc skull furnace “DVL-200DM” is based on popular plants “833-DM”, “DVL-200M” and designed for melting titanium alloys and subsequent casting in molds up to 200 kg by the method of consumable electrode.

Vacuum arc furnace “VDP-12,5 R” is made for production of high strength and high electricity-conductive Cu-Nb wires of round and rectangular wire sections in a wide range of sizes with adjustable combination of strength and conductive properties.

Melting plant “BZP” is made for refractory metals refining and obtaining single crystals by method of the floating zone melting with annular cathode heater.

Electric arc furnace with non-consumable electrode “P-1121” is made to melt ingots of nickel-containing alloys of rare-earth metals and alloys.

Molds heating unit “BPF-2” consist of two induction furnaces. It is made for heating the mplds before pouring the metal.

Aggregates of recirculation heating “ARN” type are made for the manufacture of various parts of composite materials, based on epoxy, polyester and other resins.

Furnace for thermal treatment “ARTN-6,5” is made for hardening, annealing and artificial ageing of sheets, profiles and other parts made of aluminum alloys.

Unit “PAP-3M” is made for hardening and artificial aging of aluminum alloys and tempering of titanium, and also for other technological processes, requiring high-quality heating in the temperature range from 55 to 500°C.

Recirculation thermal unit “PAP-4M” is made for artificial aging by heating and for annealing of aluminum alloys.

Electrothermal aggregate “ETA-2C” is made for hardening, annealing and aging of semi-finished products and parts made of aluminum alloys.

Plant “ALTAY-T” is made for heat treatment of parts made of aluminum and its alloys. It produce annealing, hardening, artificial aging, drawing-back.

Vacuum furnace “PV-900” is made for thermal treatment of body parts made of titanium alloys. This furnace can be used for dehydrogenization and annealing of welded constructions made of titanium alloys.

Vacuum plant “PV-900/4000” is made for vacuum annealing of large-size welded constructions made of titanium and other metals. Structurally, the plant “PV-900/4000” is designed as a cylindrical shape vacuum chamber. One side of the chamber is closed with a back cover, attached by bolting; the other side is closed with front cover.

Vacuum plant for thermal treatment “SNV-80” is made for vacuum annealing of small parts, made of titanium alloys, and for dispersion hardening of parts, made of copper alloys.

Vacuum plant “SNV-1200” is made for thermal dehydrogenization and normalization of parts made of titanium alloys.

Vacuum heating furnace “PVV-1300” is made of two chambers, located one above the other.

Induction heating plant “PIN-1” is made for pre-annealing of ceramic molds before pouring the metal.

Induction heating plant “PIN-P” is made for manifold soldering in argon medium in an airtight container placed in the inner space of the furnace.

Electric vacuum furnace “SSHVE-1.2,5/25E4” type is made for various thermal treatment processes and researches in vacuum at a temperature of 2200 OС.

Elevator vacuum furnace “PEV-5,5/1200” is made for heat treatment of parts with oil hardening.

Manufacturing of heating and cooling chambers, covers and doors of the heating chamber and cooling chambers from stainless steel.
Production of new graphite heaters.
 

Post for forging blanks heating “PN” is made for heating of forging workpieces to a temperature of 1050-1100 °C individually in induction way, with subsequent transfer of the workpieces to the press.

Plants “EKU-N”, “EKU-N1”, “EKU-N2” are made for the manufacture of assembly units of liquid-propellant rocket engines combustion chambers.

Unit for protective coatings plasma spraying “APN-250M” is made for plasma spraying of protective, heat-resistant, erosive-resistant, wear-resistant and other coatings in vacuum on different products, having an axis of rotation, on repairable parts with completely removing of previously applied coating from the treated surface and re-coating.
 

Universal plasma plant “UPU-10” is designed for metal, ceramic powders plasma spraying on the surface of parts.

Powder materials spraying plasmatron “PM-25” is used for spraying of wear-resistant, insulation and other special coatings (aluminum oxide, tungsten, molybdenum, zirconium dioxide).

Electron-beam welding plant “ELU-PM” is made for welding and heat treatment of cylindrical and conical workpieces made of stainless steel and heat-resistant superalloys, by two electron-beam guns:

Electron-beam welding plant “ELU-20R” is designed for precision electron-beam welding of circular, circumferential, longitudinal seams on cylindrical and conical products, made of stainless steel, heat-resistant and titanium alloys.

Electron-beam welding plant “ELU-20RZ” is made for precision electron-beam welding of circumferential, circular, line welds of parts made of high-strength steels and alloys based on nickel, titanium, niobium, molybdenum, copper, aluminum and dissimilar metal materials of thickness up to 100 mm.
 

Plant for high-temperature soldering with electron-beam heating “ELN-2” is made for high-temperature soldering with the electron-beam heating of parts.

Electron-beam welding plant “ELU-27” is designed for electron-beam welding of circumferential and longitudinal seams of cylindrical stainless steels, heat resistant and titanium alloys, as well as the brush seals.

Energy welding complex “BEVS-60/15” is consist of: an electron optical system - electron-beam gun (“EPN-60/15”), high-voltage power source (“IVS-60/15”), magnetic lenses and cathode glow power sources, control systems.

Vacuum electron-beam plant “UE-500” is designed for applying of single layer and multilayer metallic, oxide, carbide coatings on various products  in vacuum.

Plant for centrifugal spraying “UCRI-9” is designed to produce highly reactive metal powders of metals, heat-resistant nickel and titanium alloys by centrifugal spraying of workpieces, plasma melted by the heater in an inert gas medium with simultaneous transportation of the obtained powder materials in bulk airtight container without contact with air.

Plant for centrifugal spraying “UCRT-9” is designed to produce highly reactive metal powders of metals, heat-resistant nickel and titanium alloys by centrifugal spraying of workpieces, plasma melted by the heater in an inert gas with simultaneous transportation of the obtained powder materials in bulk airtight container without contact with air.
 

Plant for centrifugal spraying “Granule-2000” is designed to produce metal granules powders of heat-resistant and nickel alloys by centrifugal spraying of workpieces, plasma melted by the heater in an inert gas medium.

Plant for centrifugal spraying “Granule-2500” is designed to produce metal powders of highly reactive metals and titanium alloys by centrifugal spraying of workpieces, plasma melted by the heater in an inert gas medium with simultaneous transportation of the obtained powder materials in bulk airtight container without air contact.

Thyristor current transducers “TPCT-250”, “TPCT-320 are designed to standalone work as a module in the power supply systems of vacuum induction furnaces of vacuum and opened melting of ferrous and non-ferrous metals, through heating, thermal treatment.

Welding rectifiers “VSVU-400”, “VSVU-800” are made for power supply of automatic and manual arc welding  plants of continuous and pulsed arc welding  of  heat-resistant, corrosion-resistant steels and titanium alloys by non-consumable electrode in argon medium. It is also possible carbon steels welding by covered electrodes.

Power source AC “ISVU-630” is designed for automatic, semi-automatic, manual, continuous and pulse (pulsating) electric arc non-consumable electrode welding of aluminum alloys in argon medium.
 

Pulse adjustable rectifier for electrochemical treatment “VIRE-5000” is made for power supply of plants of electrochemical treatment of heat-resistant and titanium materials by direct and pulse current in conditions of mild and cold climates.

Rectifier “VPN-650” is designed to power the  plasma spraying plants. It is made by scheme of the thyristor rectifier with water cooling.

Rectifier for vacuum spraying “VNR-1000” is designed to power plants of vacuum spraying “APN-250M”.

Plant for electrochemical treatment “EHS-10BM” is designed in the way of modernization of serial plant “EHS-10B”.

Vacuum forms drying explosion-proof plant “UVS-4” is made for drying of ceramic coatings of consumable pattern molds in vacuum and ammonia.

Universal magnetic-particle flaw detector “MDS-5” is designed for non-destructive testing by magnetic-particle method.

Corner vacuum valves “UKVK” type are complete with cylinders made by “CAMOZZI” (Italy) and designed for leak-free shutoff of vacuum and gas lines, operating in the pressure range from 1x10^-5 to 1x10⁵ Pa.

Vacuum valves with electromechanical power drive “EZM” type are designed to cut the vacuum systems in the pressure range from 1x10^-5 to 1,05x10⁵ Pa on air and non-corrosive gases pipelines with operating temperatures up to 40°C.

Water heating unit “BV-1” is designed for heating and hot water supply of small residential buildings.

Water heating unit “BVU-120” is intended for heating water for single-floor and two-floor buildings, schools, hospitals, industrial facilities, bath and laundry factories, farm buildings, livestock farms, warehouses and other facilities of the area up to 1500 m². The unit can be used for hot water supply with the heat exchangers (boilers) and as a part of heating system.
 

Pumping post “PO-1” is made for pumping the large multi-beam klystrons with oil-free pumping means.

Block-container “BC” is designed for installation of unattended technological equipment and insurance of correct temperature and humidity modes of its work, as well as the creation of temperature and humidity for communications equipment in accordance with operating standards.